home *** CD-ROM | disk | FTP | other *** search
- TROUBLESHOOTING
-
- A name is not appearing in the Talk•Out user list.
- Is the computer connected to the network?
- Has the network identity been established in the Sharing Setup control panel?
- Is Talk•In installed correctly?
- Is Talk•In running?
- Has the "Refresh" button been pressed recently?
-
- Can't hear anything when the connection has been made.
- Is volume turned up in the Talk•Control panel?
- Is the microphone plugged in and operating correctly?
- Is the sensitivity control set too far to the right?
- Are you close enough to the microphone?
- Is the microphone too close to a noise source?
- Is the compatible mode off with an Apple‚Ñ¢ microphone?
- Is the compatible mode on with a third-party microphone?
- If you are using AppleTalk Remote Access, are you being patient?
-
- "Static" on the line.
- Is the sensitivity control set too far to the right?
- Is the microphone too close to a noise source?
- Is the volume turned up too high?
- Is compression on?
-
- "Echo" on the line.
- Is the sensitivity control set too far to the right?
- Is the microphone too close to the speaker?
- Is the volume turned up too high?
-
- "Feedback" on the line.
- Is the sensitivity control set too far to the right?
- Is the microphone too close to the speaker?
- Is the volume turned up too high?
-
- TECHNICAL SUPPORT
- AppleLink: Leslie2Way
- America OnLine: Leslie2Way
- Internet: 2Way@cerf.net
- FAX (619) 452-3077